Anatomage - Powering the Table on and off
Estimated Reading Time: 1 Minutes |
2022 |
Powering the Anatomage Table on and off
| This article will show you how to turn on and power off the Anatomage table. |
Powering On
| Locate the power cable and switch in the bottom left of the table. |  |
|
| After making sure the system is plugged into an outlet, press the switch away from O to l. |  |
|
| Locate the system start switch on the front of the table. |  |
|
| Flip open the switch cover and press the switch once to the left. Close the cover afterwards to keep the switch from being hit accidentally. |  |
|
Powering Off
| After saving any necessary work and closing all applications locate the power switch on the front of the table. |  |
|
| Flip open the switch cover and press the switch once to the left. Close the cover afterwards to keep the switch from being hit accidentally. |  |
|
| Locate the power cable and switch in the bottom left of the table. | |
|
| Flip the power switch from l to O to turn off power to the table. |  |
|